Navyug Enterprises
Navyug Enterprises
Gurgaon, Haryana
Send SMS
Send E-mail

Air Preparation Units

Leading Wholesale Trader of filter with manual drain, filter with metalbowl, mist seperator, regulator built in nrv, lubricator with metalbowl and filter from Gurgaon.
Request CallBack
Filter with Manual Drain
Get Best Quote

Filter with Manual Drain

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
Maximum Supply Pressure10 (bar)
Medium Temperature5deg - 50deg C
Filteration1, 5, 25, 40 (standard), 50, 100 (Micro m)
Bowl MaterialPolycarbonate
InstallationVertical (as in the picture)
Materials of ConstructionAluminium, Bronze, Steel, Acetal, Polycarbonate, SS, Nitrile
Optional AccessoriesClamp, Modular mounting kit, Pressure gauge
Features:
  • Conforms to ISO 5782-1
  • Suitable for Modular mounting
  • Steel bowl guard, bayonet type on F14, F15 & F17 models and threaded type on F13 model
  • Press type Manual drain for easy operation
  • Bronze filtering element
  • Separator and shield for efficient moisture separation

Precautions:
  • Note the direction of flow before installation and connect piping accordingly.
  • Flush pipings for dirt, dust, rust and other foreign particles.
  • Install in clean atmosphere.
  • Nipples of taper threads ( R ) to be used with teflon tape. Ensure teflon tape does not enter the unit during tightening. Nipples of straight threads ( G ) to be used with sealing washer.
  • Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene, kerosene or other aromatic hydrocarbons.

Series: F1

Yes! I am Interested
View PDF
Request CallBack
Filter with Metalbowl
Get Best Quote

Filter with Metalbowl

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
MediumCompressed air
Maximum Supply Pressure20 (bar)
Medium Temperature5deg - 50deg C
Bowl MaterialAluminium
InstallationVertical (as in the picture)
Materials of ConstructionAluminium, Bronze, Steel, Acetal, SS, Nitrile
Optional AccessoriesClamp, Modular mounting kit
Features:
  • For higher pressure range above 10 bar
  • Suitable for Modular mounting
  • Aluminium bowl guard, bayonet type (3/4 and 1" only)
  • Press type Manual drain for easy operation
  • Suitable for Internal autodrain also
  • Bronze filtering element
  • Separator and shield for efficient moisture separation

Precautions:
  • Note the direction of flow before installation and connect piping accordingly.
  • Flush pipings for dirt, dust, rust and other foreign particles.
  • Install in clean atmosphere.
  • Nipples of taper threads ( R ) to be used with teflon tape. Ensure teflon tape does not enter the unit during tightening. Nipples of straight threads ( G ) to be used with sealing washer.
  • Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene, kerosene or other aromatic hydrocarbons.

Series : F1M

Yes! I am Interested
View PDF
Request CallBack
Mist Seperator
Get Best Quote

Mist Seperator

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
MediumCompressed filtered air
Maximum Supply Pressure10 (bar)
Medium Temperature5deg - 50deg C
Bowl MaterialPolycarbonate
InstallationVertical (as in the picture)
Materials of ConstructionAluminium, Borosilicate, Steel, Acetal, Polycarbonate, SS, Nitrile
Optional AccessoriesClamp, Modular mounting kit
Features:
  • Conforms to ISO 8573-1 standards
  • Borosilicate filtering element
  • 99.99% compressed filtered air upto 0.01micron to 0.1 micron
  • Suitable for Modular mounting
  • Steel bowl guard, bayonet type on FS15 model and threaded type on FS13 model
  • Press type Manual drain for easy operation
  • Separator for efficient moisture separation

Application:
  • These type of mist separators are used in Chemical, Pharmaceutical, Food processing industry, Paint shops and for other precision pneumatic systems.

Function:
  • Removes submicronic oil, water droplets and solid contaminants from compressed air.
  • Used for high efficient filtration of compressed air, removing fine oil particles and droplets of sizes upto 0.01 microns

Precautions:
  • Mount the mist seperator in line, next to a standard air filter series F1 with 5 micron filter element
  • Note the direction of flow before installation and connect piping accordingly
  • Flush pipings for dirt, dust, rust and other foreign particles
  • Install in clean atmosphere
  • Nipples of taper threads (R) to be used with teflon tape. Ensure Teflon tape does not enter the unit during tightening. Nipples of straight threads (G) to be used with sealing washer
  • Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene kerosene or other aromatic hydrocarbons.

 

Series : FS1


Yes! I am Interested
View PDF
Save time! Get a Best Deal

*Your information is safe with us.

Request CallBack
Regulator Built in NRV
Get Best Quote

Regulator Built in NRV

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
MediumCompressed air - Filtered
Maximum Supply Pressure15 (bar)
Regulating Pressure Range0.2 - 2, 0.2 - 4, 0.5 - 7, 0.5 - 10 (Standard) (bar)
Medium Temperature5deg - 60deg C
InstallationAny position
Materials of ConstructionAluminium, Brass, Steel, Acetal, SS, Nitrile
Features:
  • Conform to ISO 6953 1
  • Suitable for panel and modular mountings
  • Non raising Press to Lock adjusting knob for locking at any set pressure
  • Diaphragm operated, relieving type
  • Pressure compensated by balanced poppet
  • Flow compensated in models R14 and R15 (with venturi) for faster response
  • Good flow and regulating characteristics
  • Built in non return valve allows free air flow in reverse direction. When the inlet air is reduced by and below the setup pressure

Application:
  • Apart from its basic regulating characteristics in forward direction, this regulator with a built in non return valve allows free air flow in reverse direction, thus enabling to be used in applications requiring cylinders to exert two different force during extending and retracting strokes.

Pressure Setting:
  • Pull the knob and adjust by turning the knob clockwise to increase the pressure. Push the knob back to its locked position. ( Turning the knob counter clockwise will reduce the pressure )

Precautions:
  • Note the direction of flow before installation and connect piping accordingly
  • Flush pipings for dirt, dust, rust and other foreign particles
  • Install in clean atmosphere
  • Nipples with taper threads ( R ) to be used with teflon tape. Ensure Teflon tape doesnot enter the unit during tightening. Nipples with straight threads ( G ) to be used with sealing washer.

Series: R1N

Yes! I am Interested
View PDF
Request CallBack
Lubricator with Metalbowl
Get Best Quote

Lubricator with Metalbowl

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
MediumCompressed air - Filtered
Maximum Supply Pressure20 (bar)
Medium Temperature5deg - 60deg C
Bowl MaterialAluminium
InstallationVertical (as in the picture)
Materials of ConstructionAluminium, Bronze, Steel, SS, Nitrile
Features:
  • For higher pressure range above 10 bar
  • Suitable for Modular mounting
  • Fog / mist type
  • Fine adjustment of lubrication
  • Aluminium bowl guard, bayonet type (3/4 and 1_ only)
  • Lubrication proportional to flow

Precautions:
  • Note the direction of flow before installation and connect piping accordingly
  • Flush pipings for dirt, dust, rust and other foreign particles
  • Install in clean atmosphere
  • Nipples with taper threads ( R ) to be used with teflon tape. Ensure teflon tape does not enter the unit during tightening. Nipples with straight threads ( G ) to be used with sealing washer
  • Oil may be filled when under pressure. However it is recommended to vent the air completely before filling the oil.

Series: L1M

Yes! I am Interested
View PDF
Request CallBack
Filter
Get Best Quote

Filter

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
MediumCompressed air
Maximum Supply Pressure10 (bar)
Medium Temperature5deg - 50deg C
Filteration1, 5, 25, 40 (standard), 50, 100 (Micro m)
Bowl MaterialPolycarbonate
InstallationVertical (as in the picture)
MaterialsAluminium
Optional AccessoriesClamp, Modular mounting kit, Pressure gauge
Features:
  • Conforms to ISO 5782 -1
  • Suitable for Modular mounting
  • Steel bowl guard, bayonet type on F14, F15 &
  • F17 models and threaded type on F13 model.
  • Press type Manual drain for easy operation.
  • Bronze filtering element.
  • Separator and shield for efficient moisture separation.

Precautions:
  • Note  the  direction  of  flow  before  installation  and  connect  piping  accordingly.
  • Flush  pipings  for  dirt,  dust,  rust  and  other  foreign  particles.
  • Install  in  clean  atmosphere.
  • Nipples  of  taper  threads  (  R  )  to  be  used  with  teflon  tape.  Ensure  teflon  tape  does  not  enter  the  unit  during  tightening.
  • Nipples  of  straight  threads  (  G  )  to  be  used  with  sealing  washer.
  • Polycarbonate bowls  may get damaged  and  possibly  fail  if  exposed  to  synthetic  oils,  thinner,  solvents,  trichloroethylene, kerosene or other  aromatic  hydrocarbons.

Yes! I am Interested
View PDF
Save time! Get a Best Deal

*Your information is safe with us.

Request CallBack
FRC with Internal Autodrain
Get Best Quote

FRC with Internal Autodrain

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
MediumCompressed air
Operating Pressure2 - 10 (bar)
Regulating Pressure Range0.2 - 2, 0.2 - 4, 0.5 - 7, 0.5 - 10 (Standard)
Medium Temperature5deg - 50deg C
Filteration1, 5, 25, 40 (standard), 50, 100 (Micro m)
Bowl MaterialPolycarbonate
InstallationVertical (as in the picture)
Features:
  • Modular type
  • Suitable for panel mounting
  • Filter
  • Bronze filtering element
  • Separator and shield for efficient moisture separation
  • Bayonet type steel bowl guard
  • Internal auto drain
  • Float type, no electrical connections required
  • Provided with manual drain
  • Provision for drain tube connection, to take the condensate away from the unit, to keep the working area clean
  • Regulator
  • Diaphragm operated, relieving type
  • Pressure compensated by balanced poppet
  • Flow compensated for faster response
  • Non raising Press to lock adjusting knob for locking at any set pressure
  • Good flow and regulating characteristics

Precautions:
  • Note the direction of flow before installation and connect piping accordingly
  • Flush pipings for dirt, dust, rust and other foreign particles
  • Install in clean atmosphere
  • Nipples of taper threads ( R ) to be used with teflon tape. Ensure teflon tape does not enter the unit during tightening. Nipples of straight threads ( G ) to be used with sealing washer
  • Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene kerosene or other aromatic hydrocarbons

Series : FRC1A

Yes! I am Interested
View PDF
Request CallBack
FRLM with Piping Adaptor
Get Best Quote

FRLM with Piping Adaptor

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
MediumCompressed air
Maximum Supply Pressure10 (bar)
Regulating Pressure Range0.2 - 2, 0.2 - 4, 0.5 - 7, 0.5 - 10 (Standard) (bar)
Medium Temperature5deg - 50deg C
Filteration1, 5, 25, 40 (standard), 50, 100 (Micro m)
Bowl MaterialPolycarbonate
Features:
  • Modular type for easy and fast maintenance
  • Suitable for wall mounting
  • Filter
  • Bronze filtering element
  • Separator and shield for efficient moisture separation
  • Press type manual drain for easy operation
  • Regulator
  • Diaphragm operated, relieving type
  • Pressure compensated by Balanced poppet
  • Flow compensated in models FRLM14, FRLM15 and FRLM17 for faster response
  • Non raising Press to Lock adjusting knob for locking at any set pressure
  • Lubricator
  • Fog/Mist type Lubricator
  • Fine adjustment of lubrication
  • Lubrication proportional to flow
  • Steel bowlguard, bayonet type on FRLM14, FRLM15 and FRLM17 models and threaded type on FRLM13 model
  • Good flow and regulating characteristics

Precautions:
  • Note the direction of flow before installation and connect piping accordingly
  • Flush pipings for dirt, dust, rust and other foreign particles
  • Install in clean atmosphere
  • Nipples of taper threads ( R ) to be used with teflon tape. Ensure teflon tape doesnot enter the unit during tightening. Nipples of straight threads ( G ) to be used with sealing washer
  • Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene, kerosene or other aromatic hydrocarbons

Series: FRLM1

Yes! I am Interested
View PDF
Request CallBack
FRLM with Internal Autodrain
Get Best Quote

FRLM with Internal Autodrain

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
MediumCompressed air
Regulating Pressure Range0.2 - 2, 0.2 - 4, 0.5 - 7, 0.5 - 10 (Standard) (bar)
Medium Temperature5deg - 50deg C
Bowl MaterialPolycarbonate
Optional AccessoriesPressure gauge
Operating Pressure2 - 10 (bar)
Features:
  • Modular type
  • Suitable for panel mounting
  • Filter
  • Bronze filtering element
  • Separator and shield for efficient moisture separation
  • Bayonet type steel bowl guard
  • Internal Autodrain
  • Float type, no electrical connections required
  • Provided with manual drain
  • Provision for drain tube connection, to take the condensate away from the unit, to keep the working area clean
  • Regulator
  • Diaphragm operated, relieving type
  • Pressure compensated by balanced poppet
  • Flow compensated ( with venturi ) for faster response
  • Non raising Press to lock adjusting knob for locking at any set pressure
  • Good flow and regulating characteristics

Precautions:
  • Note the direction of flow before installation and connect piping accordingly
  • Flush pipings for dirt, dust, rust and other foreign particles
  • Install in clean atmosphere
  • Nipples of taper threads ( R ) to be used with teflon tape. Ensure teflon tape doesnot enter the unit during tightening. Nipples of straight threads ( G ) to be used with sealing washer
  • Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene, kerosene or other aromatic hydrocarbons.

Series: FRLM1A

Yes! I am Interested
View PDF
Save time! Get a Best Deal

*Your information is safe with us.

Request CallBack
Pressure Sensor One Output
Get Best Quote

Pressure Sensor One Output

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
Port sizeR 1/8
Rated Pressure Range0 ~ 10 bar
Setting Pressure Range-1 ~ 10 bar
Withstand Pressure15 bar
FluidAir, Non-corrosive gases, Incombustible gases
Power Supply Voltage12 to 24V DC +- 10%, Ripple (P-P) 10% or less
Features:
  • 2 Colours display (Red / Green)
  • Set pressure selectable (kPa, psi, kgf/cm2, bar)
  • Both upper and lower limits of pressure can be set independently
  • Panel mountable
  • Direct mountable
  • Both PNP & NPN versions
  • Single output

Series : PS

Yes! I am Interested
View PDF
Request CallBack
FRL Modular
Get Best Quote

FRL Modular

Approx. Price: Rs 5,600 / UnitGet Latest Price
Product Details:
MediumCompressed air
Maximum Supply Pressure10 (bar)
Regulating Pressure Range0.2 - 2, 0.2 - 4, 0.5 - 7, 0.5 - 10 (Standard) (bar)
Medium Temperature5deg - 50deg C
Filteration1, 5, 25, 40 (standard), 50, 100 (Micro m)
Bowl MaterialPolycarbonate
Optional AccessoriesPressure gauge
Features:
  • Modular type for easy and fast maintenance.
  • Suitable for wall mounting.

Filter:
  • Bronze filtering element.
  • Separator and shield for efficient moisture separation.
  • Press type manual drain for easy operation

Regulator:
  • Diaphragm operated, relieving type.
  • Pressure compensated by balanced poppet.
  • Flow compensated ( with venturi ) in models FRLM14,
  • FRLM15 and FRLM17 for faster response.
  • Non raising ' Press to lock ' adjusting knob for locking at any set pressure.

Lubricator:
  • Fog / Mist type Lubricator.
  • Fine adjustment of lubrication.
  • Lubrication proportional to flow.
  • Steel bowl guard, bayonet type on FRLM14 ,FRLM15 & FRLM17 models and threaded type on FRLM13 model.
  • Good flow and regulating characteristics.

Yes! I am Interested
View PDF
Request CallBack
Regulator
Get Best Quote

Regulator

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
InstallationAny position
Medium Temperature5deg - 60deg C
Maximum Supply Pressure15 (bar)
Materials of ConstructionAluminium, Brass, Steel, Acetal, SS, Nitrile
Optional AccessoriesClamp, Modular mounting kit, Pressure gauge
Features:
  • Conform to ISO 6953 1
  • Suitable for panel and modular mountings
  • Non raising Press to Lock adjusting knob for locking at any set pressure
  • Diaphragm operated, relieving type
  • Pressure compensated by balanced poppet
  • Flow compensated in models R14, R15 and R17 (with venturi) for faster response
  • Good flow and regulating characteristics

Precautions:
  • Note the direction of flow before installation and connect piping accordingly
  • Flush pipings for dirt, dust, rust and other foreign particles
  • Install in clean atmosphere
  • Nipples of taper threads ( R ) to be used with teflon tape. Ensure teflon tape does not enter the unit during tightening. Nipples of straight threads ( G ) to be used with sealing washer.

Pressure Setting:
  • Pull the knob and adjust by turning the knob clockwise to increase the pressure. Push the knob back to its locked position. ( Turning the knob counter clockwise will reduce the pressure )

Series : R1

Yes! I am Interested
View PDF
Save time! Get a Best Deal

*Your information is safe with us.

Request CallBack
FRC with Metal Bowl
Get Best Quote

FRC with Metal Bowl

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
MediumCompressed air
Maximum Supply Pressure20 (bar)
Regulating Pressure Range0.2 - 2, 0.2 - 4, 0.5 - 7, 0.5 - 10 (Standard) (bar)
Medium Temperature5deg - 60deg C
Bowl MaterialAluminium
Features:
  • Modular type
  • Suitable for panel mounting
  • Filter
  • Bronze filtering element
  • Separator and shield for efficient moisture separation
  • Press type manual drain for easy operation
  • Suitable for automatic drain
  • Regulator
  • Diaphragm operated, relieving type
  • Pressure compensated by balanced poppet
  • Flow compensated
  • Non raising Press to lock adjusting knob
  • Aluminium bowl guard, bayonet type (3/4 and 1" only)
  • Good flow and regulating characteristics

Precautions:
  • Note the direction of flow before installation and connect piping accordingly
  • Flush pipings for dirt, dust, rust and other foreign particles
  • Install in clean atmosphere
  • Nipples with taper threads ( R ) to be used with teflon tape. Ensure teflon tape does not enter the unit during tightening. Nipples with straight threads ( G ) to be used with sealing washer.

Series: FRC1M

Yes! I am Interested
View PDF
Request CallBack
Auto Drain Valve
Get Best Quote

Auto Drain Valve

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
MediumCompressed air
Operating Pressure2 - 10 (bar)
Ambient Temperature0 - 60deg C
InstallationVertical (as in the picture)
Materials of ConstructionAluminium, Brass, Acetal, Stainless steel, Nitrile
Features:
  • Individual unit (Externally mountable)
  • Low operating pressure
  • Compact size
  • Elegant design and finish
  • Long life

Function:
  • These Auto drain units are externally mountable on G1/4, 3/8 and 1/2, 3/4, 1 size Filters and FRC units.
  • As the condensed water collects in the drain unit, the float moves up and drains the water. The condensate water can also be drained manually.
  • A plastic tube can be fitted at the bottom of the auto drain unit to take the drained water away from the unit.

Yes! I am Interested
View PDF
Request CallBack
Pressure Switch
Get Best Quote

Pressure Switch

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
Operating pressure range0 - 10 bar
Withstand pressure15 bar
Response time5ms or less
Current Consumption21mA MAX.
Repeatability+-1% F.S.
Features:
  • Quick response
  • Easy adjustability of set pressure
  • Hysteresis adjustable

Applications:
  • Pressure switch can be used in compressed air applications. Some of the applications include,
  • Protect pneumatic equipment / against over pressure
  • For pressure sequencing
  • Can be used in application, to operate sequentially

Series : PW

Yes! I am Interested
View PDF
Save time! Get a Best Deal

*Your information is safe with us.

Request CallBack
Pressure Sensor Two Outputs
Get Best Quote

Pressure Sensor Two Outputs

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
Port sizeR 1/8
Rated pressure range0 - 10 bar
Operating / Setting pressure range-1 - 10 bar
Withstand pressure1.5 times of rated pressure range
FluidAir
Features:
  • Set pressure selectable (Mpa, psi, kgf/cm2, bar)
  • Both upper and lower limits of pressure can be set independently
  • Panel mountable
  • Direct mountable
  • Both PNP & NPN versions
  • Two outputs

Series : PS

Yes! I am Interested
View PDF
Request CallBack
FRCL Modular
Get Best Quote

FRCL Modular

Approx. Price: Rs 5,600 / UnitGet Latest Price
Product Details:
MediumCompressed air
Maximum Supply Pressure10 (bar)
Regulating Pressure Range0.2 - 2, 0.2 - 4, 0.5 - 7, 0.5 - 10 (Standard) (bar)
Medium Temperature5deg - 50deg C
Bowl MaterialPolycarbonate
Features:
  • Modular type for easy and fast maintenance.
  • Suitable for wall mounting.
 
Filter:
  • Bronze filtering element.
  • Separator and shield for efficient moisture separation.
  • Press type manual drain for easy operation

Regulator:
  • Diaphragm operated, relieving type.
  • Pressure compensated by balanced poppet.
  • Flow compensated ( with venturi ) in models FRLM14,
  • FRLM15 and FRLM17 for faster response.
  • Non raising ' Press to lock ' adjusting knob for locking at any set pressure.

Lubricator:
  • Fog / Mist type Lubricator.
  • Fine adjustment of lubrication.
  • Lubrication proportional to flow.
  • Steel bowl guard, bayonet type on FRLM14 ,FRLM15 & FRLM17 models and threaded type on FRLM13 model.
  • Good flow and regulating characteristics.

Yes! I am Interested
View PDF
Request CallBack
Filter Regulator Combination
Get Best Quote

Filter Regulator Combination

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
MediumCompressed air
Medium Temperature5deg - 50deg C
Bowl MaterialPolycarbonate
Filteration1, 5, 25, 40 (standard), 50, 100 (Micro m)
Features:
  • Suitable for Modular mounting
  • Steel bowl guard, Bayonet type
  • Internal Autodrain
  • Float type, no electrical connections required
  • Provided with manual drain
  • Provision for drain tube connection, to take the condensate away from the unit, to keep the working area clean
  • Bronze filtering element
  • Separator and shield for efficient moisture separation

Precautions:
  • Note the direction of flow before installation and connect piping accordingly.
  • Flush pipings for dirt, dust, rust and other foreign particles.
  • Install in clean atmosphere.
  • Nipples of taper threads ( R ) to be used with teflon tape. Ensure teflon tape does not enter the unit during tightening. Nipples of straight threads ( G ) to be used with sealing washer.
  • Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene, kerosene or other aromatic hydrocarbons.

Series : F1A

Yes! I am Interested
View PDF
Save time! Get a Best Deal

*Your information is safe with us.

Request CallBack
Clamps for FRL
Get Best Quote

Clamps for FRL

Approx. Price: Rs 1,000 / UnitGet Latest Price
Product Details:
MaterialCarbon Steel
Surface TypeCoated
StructureT-Clamp
Thickness3.5 - 12 mm
How to Order:
  • Mention the ordering number required

Example:
  • Clamp for 3/8 Filter, Lubricator series F14, L14 - Ordering no : A2C32


    Yes! I am Interested
    View PDF
    Request CallBack
    Pressure Gauge
    Get Best Quote

    Pressure Gauge

    Approx. Price: Rs 1,000 / UnitGet Latest Price
    Product Details:
    Accuracy +-0.25%
    Range -1 - 600bar
    Body MaterialSteel
    Size4"(100mm)
    How to Order:
    • Mention the ordering number required

    Example:
    • Pressure Gauge for Regulator with Pressure range 0 - 10 bar : Ordering no : A2G02

    Yes! I am Interested
    View PDF
    Request CallBack
    Shut Off Valve
    Get Best Quote

    Shut Off Valve

    Approx. Price: Rs 1,000 / UnitGet Latest Price
    Product Details:
    Type3/2
    Operating Pressure Range0 - 10 bar
    Ambient Temperature5deg - 60deg C
    Materials of ConstructionAluminium, Brass, Nitrile
    Features:
    • Connecting thread at both ends
    • Connection - G1/4, G3/8, G1/2
    • Modular mounting with FRL

    Functions:
    • Opening and closing of airline with relieving of the downstream pressure
    • A window display to show the valve position when the valve is On condition (or) Exhaust condition

    Series : GS2

    Yes! I am Interested
    View PDF
    Save time! Get a Best Deal

    *Your information is safe with us.

    Request CallBack
    Lockable Shut Off Valve
    Get Best Quote

    Lockable Shut Off Valve

    Approx. Price: Rs 1,000 / UnitGet Latest Price
    Product Details:
    Type3/2
    Operating Pressure Range0 - 10 bar
    Ambient Temperature5deg - 60deg C
    Materials of ConstructionAluminium, Brass, Nitrile
    Features:
    • Modular mounting with FRL
    • Port thread at both ends
    • Window display to show the valve position

    Functions:
    • Opening and closing of airline with relieving of downstream pressure at closed condition
    • The valve can be locked at the closing condition (Exhaust 2 to 3)

    Series: GS2

    Yes! I am Interested
    View PDF
    Request CallBack
    Shut Off Valve Lockable
    Get Best Quote

    Shut Off Valve Lockable

    Approx. Price: Rs 6,400 / UnitGet Latest Price
    Product Details:
    Type3/2
    Operating Pressure Range0 - 10 bar
    Ambient Temperature5deg - 60deg C
    Materials of ConstructionAluminium, Brass, Nitrile
    Features:
    • Modular mounting with FRL
    • Port thread at both ends
    • Sizes - G1/4, G3/8 & G1/2
    • Window display to show the valve position ( i.e.) the valve is in On condition or Off condition.

    Function:
    • Opening and closing of airline with relieving of down stream pressure at closed condition.
    • The valve can be locked at the closing condition (Exhaust 2 - 3).

    Yes! I am Interested
    View PDF
    Request CallBack
    Nipples
    Get Best Quote

    Nipples

    Approx. Price: Rs 1,800 / PieceGet Latest Price
    Product Details:
    MaterialCast Iron
    Usage/ApplicationStructure Pipe
    Size3/4 inch
    Is It Rust ProofRust Proof
    Features:
    • Wide variety of nipples available
    • Nickel plated brass body
    • Male (R) taper threads with thread sealant coating Male parallel threads with sealing washer (M5 only)

    Yes! I am Interested
    View PDF
    Save time! Get a Best Deal

    *Your information is safe with us.

    Request CallBack
    Lubricator
    Get Best Quote

    Lubricator

    Approx. Price: Rs 1,000 / UnitGet Latest Price
    Product Details:
    MediumCompressed air - Filtered
    Maximum Supply Pressure10 (bar)
    Medium Temperature5deg - 50deg C
    Bowl MaterialPolycarbonate
    Materials of ConstructionAluminium, Bronze, Steel, Acetal, Polycarbonate, SS, Nitrile
    Features:
    • Conform to ISO 6301-1
    • Suitable for Modular mounting
    • Fog/Mist type
    • Fine adjustment of lubrication
    • Steel bowlguard, bayonet type on L14, L15 & L17 models and threaded type on L13 model
    • Lubrication proportional to flow

    Precautions:
    • Note the direction of flow before installation and connect piping accordingly
    • Flush pipings for dirt, dust, rust and other foreign particles
    • Install in clean atmosphere
    • Nipples of taper threads ( R ) to be used with teflon tape. Ensure teflon tape does not enter the unit during tightening. Nipples of straight threads ( G ) to be used with sealing washer
    • Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene, kerosene or other aromatic hydrocarbons
    • Oil may be filled when under pressure. However it is recommended to vent the air completely before filling the oil.

    Series : L1

    Yes! I am Interested
    View PDF

    Explore more products

    X
    Looking for “Air Preparation Units”?