Air line valves

• Directly mountable on cylinder/valve ports
• Can be rotated by 360 degree
• Fine regulation of air flow
• Nickel plated body
• Male threads(R) teflon coated
• Elegant design and finish

• These valves allow controlled flow of air in one direction and free flow in the other direction.
• These are available in two versions - a) Supply control version, and b) Exhaust control version.

• These valves are used to control the speed of piston in a pneumatic cylinder.

• Available in two versions
• Low cracking and closing pressure
• Bubble tight - elastomer seat
• Plastic portion can be turned by 360°
• Teflon pre-coated male taper threads

• Pilot  operated  non-return  valve  is  used  for  stopping  the  cylinder  in  intermediate  position.  So  long  as  a  pilot  signal  is applied, air is free to flow to and from the cylinder. When the pilot signal is removed, the valve acts as a conventional non- return valve and prevents air from exhausting from the cylinder, thus stopping movement.

• While ordering Pilot operated non-retsurn valve, mention the ordering number given in the corresponding tables.

• Directly mountable on cylinder / valve ports
• Fine regulation of air flow
• Male threads (G) with sealing washer
• Elegant design and finish
• Slotted head screw adjusting type

• These valves allow controlled flow of air in one direction and free flow in the other direction.
• These are available in two versions - a) Supply control version, and b) Exhaust control version.

• These valves are used to control the speed of piston in a pneumatic cylinder.

• Inline mounted
• Sleeve type, saves space
• Smooth, easy operation

• These valves can be used at the inlet of pneumatic tools like screwdriver, grinder etc., pneumatic systems and near machineries using pneumatic systems, for quick and convenient connecting - disconnecting of compressed air.

• Moving the sleeve towards " OUT ", connects the air line to the system and moving the sleeve in the opposite direction, will close the inlet port and exhaust the down stream air.

• Note the direction of flow before installation and connect piping accordingly.
• Flush pipings for dirt, dust, rust and other foreign particles.
• Install in clean atmosphere.
• Use teflon tape on taper threads. Ensure teflon tape does not enter the unit during tightening.

Series : GS1

• AND valve delivers air at the outlet (A) only when air signal is present at both inputs (X and Y)
• If two signals of different pressure is applied, the lower pressure is connected to outlet (A).

• An AND valve (or dual pressure valve) is used in cases where at least 2 signals are required to be present before a function is executed. It can be used in safety circuits and logic controls

How to Order:

• While ordering AND valve, mention the ordering number given in the corresponding tables.

Series : GA

• Ball type
• In line mounting
• Easy and smooth operation
• Assembly on rigid pipe system
• Maintenance free
• Bubble tight sealing

• All compressed airlines
• Pneumatic circuits in industry
• Pneumatic control panels
• Machine tools
• Pneumatic systems of machinery

• Note the direction of flow before installation & connect piping accordingly
• Flush piping for dirt, rust and other foreign particles
• Install in clean atmosphere